CTZN(3m) 디저털 전도도 전극 RS-485 Inductive Conductivity

Construction and dimensions

(1) NTC Temperature sensor 

(2) EPDM Head of body

(3) PVC Sensor body with measurement electronics 

(4) Cable bushing 

(5) Securely connected connection cable

DIMENSIONS – VERSION IMMERSION/INPIPE PVC INSTALLATION 

DIMENSIONS – VERSION INPIPE STAINLESS STEEL INSTALLATION

Accessories for PVC pipe-mounting.

Every system of assembly is delivered with an adapter (and the appropriate joints) and one T of assembly (90 ° for CTZN sensor) to stick on a 90 mm diameter pipe. Its special design type ensures the correct inflow to the sensor, thus preventing incorrect measurements. 

Please note the following when planning your piping set-up: 

• The fitting must be easily accessible to allow the sensor or the fitting itself to be maintained and cleaned regularly 

• We recommend bypass measurements. It must be possible to remove the sensor through the use of shut-off valves 

• When working with systems involving pressure and/or temperature, ensure that the fitting and sensor meet all relevant requirements 

• The system designer must check that the materials in the fitting and sensor are suitable for the measurement (chemical compatibility, for instance)

                                                              Mounting system for CTZN sensor (PF-ACC-M-00001)

1 Unscrew the union nut (2) from the PVC flow fitting (3). 

2 Guide the sensor cable through the union nut on the fitting. 

3 Insert the sensor (1) into the fitting as far as the position shown in the middle image above. 

4 Screw the union nut onto the fitting as far as the stop.